Printable Halloween origami box

It's been a while hasn't it? So just in time for Halloween, printable spider origami boxes for treats or tricks. If you know how to fill tricks in there, let me know! There is some crazy origami folding involved, but you'll get the hang of it after one or two attempts. If you can fold, you can do this.


Use letter size (8½"x11") white or colored paper. Construction paper or light card stock works well too. Just something not too stiff because you need to do a lot of folding.

Print the box top sheet from here and the box bottom sheet from here. *You don't really need to print the bottom sheet really. Just cut two rectangles 6½"x 5¼"(16.5cm x 13.3cm).

Cut along the lines to get the two rectangle sheets for the top of the box

and cut the bottom box rectangle sheets either from the print out or without(see * above).

With one of the top box rectangle sheet, have it face towards you upside down as shown in the photo.

Flip the sheet over and make sure the print is still upside down.

Fold the sheet in half

and in half again.

Unfold and you get three vertical lines as shown in the above photo.

This is a little tricky. Fold the right bottom corner towards the third vertical line with it's corner ending with the middle vertical line. Hmmff....look at the photo...

like so.

Fold the top edge down horizontally to meet up with the bottom right corner.

Fold the top again horizontally along where the top edge and the corner meet.

You should have something that looks like this.

Unfold everything. "Say what?" I know... just do it.

Now fold a line from the bottom of the third vertical line to the top folded line corner.

Like so. Then unfold.

Now do the same with the middle vertical line bottom to the corner where the third vertical line and top line meets.

Like so. Unfold

Again same thing, first vertical line bottom to the corner where the middle vertical line and top line meets.

Like so. Unfold.

And fold along the bottom left corner to the corner where the first vertical line and top line meets.

Like so. And yes, unfold

So your sheet should have these folded creased lines which we will use for our final folds.

Fold the top down once.

Fold the bottom right corner fold.

Fold the third vertical line up as you are folding the next diagonal line in.

To look like this.

Repeat with folds of the next vertical line and diagonal line.

To look like this.

And finally fold the last vertical and diagonal lines..

so it looks like this.
Repeat all the same origami folding steps with the other top rectangle sheet.

When you have both sheets folded, you are ready to assemble the top of the box.

Slide the two pieces together like so.

It should look like this.

At the top, slide the right edge under the left.

Shove it in.

In the bottom the left edge should slide under the right.

After a few shoving and adjustment here and there it should look like this.

Turn it over and you have the top of the box.

Repeat all the exact same steps, folding, and combining with the two bottom rectangular sheets.

Cut out that little printed spider.

Glue it on top of the box. I used these styrofoam 3D dots to make it stand out.
I think those plastic spiders would be fun too.

Add some googly eyes or other ghouly decorations.

Place the top over the bottom.
Don't forget to fill it with your favorite Halloween treats.

and Voila, enjoy!!

*All printables are for personal, non-commercial use only.*

Butterfly Wine Glass Place Cards

I'm sure you were wondering when that Easter printable was going to be taken off the side there. Me too. Every time I go onto my blog it made me scrunch my face, but now no more face scrunching because there's a new printable!

This printable is just in time for summer. My version of those butterfly wine glass place cards you've seen at party stores, wedding blogs. Perfect for DIY weddings, warm evening garden parties, or because you love butterflies on your wine glasses.

Download them here. Print them on 8.5 x 11 sheets of regular paper or card stock. Make sure you set your printer setting to "Fit to Printable Area". Read all below first before starting because there are a few different variations.

With a paper cutter or a pair of scissors, cut the lines that are horizontal and vertical,

So you will end up with the four pieces of paper and the beginning of four butterflies.

Fold each piece of paper along the fold line as shown.

If you are using card stock. I recommend you to score the line lightly with an exact-o knife before you fold. It makes the fold cleaner and easier.

Cut the outline of the butterfly.

Snip out the center opening.

With an exact-o knife cut out the design.
If you want both wings to have the design, keep your butterfly folded.

If you only want one of the wings with the design, open up your butterfly first before cutting the design.

Fold the wings along where the arrows are pointing.

Again, if you are using card stock score lightly before folding.

~~~~~~~~~
If you don't like the whole cutting out the design with an exact-o knife business, because frankly it's a lot of work, then you can simply have the design as is.

Just make sure you fold the center the other way where the design is facing in.

Then fold the wings.
~~~~~~~~~

Place the center opening over the rim of a wine glass and...

Voila, enjoy!!

*All printables are for personal, non-commercial use only.*